Top 10 Plylox Hurricane Window Clips 34

0
542 reviews analysed

1. PLYLOX Hurricane Window Clips 20 Pack (Stainless Steel, 3/4")

PLYLOX Hurricane Window Clips 20 Pack (Stainless Steel, 3/4")

Feature

Description

Material Type:Stainless Steel | Size Name:3/4″

Don’t be fooled by imitations, PLYLOX Hurricane Window Clips are the only independent lab tested and hurricane proven tension clip on the market. They have always, and will always be proudly made in the USA with American made steel. Experts say that the most vulnerable part of your home during a windstorm is your windows, and the best way to protect your family and your home is to cover your windows. PLYLOX clips make it quick and easy to board up your home so that you can focus on other important issues. To use, simply measure your window casing and be sure that your windows are inset at least 2-1/2″ to 3″ deep. Once this is established, measure the height x width of the inside of your window casing. Subtract 1/4″ from that measurement and cut your plywood to these exact dimensions. Take your clips out of the bag and slide them onto the vertical sides of your plywood. You will need to first place them about 6″ from the top and bottom of your plywood shutter, and space them according to the chart in the last picture. If they do not fit tightly on your plywood, simply place the tension leg down on a flat surface and with the heel of your hand, push down on the area of the clip that goes on the plywood until they fit snug. Next, place your plywood shutter system into your window frame, then give it a firm push into the casing. Once you are done, move onto the next window and repeat the process. Once the storm has passed, simply use your fingers behind one side of the clips and remove the tension. Your shutter should pop out of the casing. Store your PLYLOX in a safe, dry space for future use.

2. PRIME-LINE Hurricane Board-Up Clips, Fits 1/2 in. Thick Plywood, Stamped Steel, Unfinished, for Brick, Wood & Stucco, Pack of 50 (MP5099)

PRIME-LINE Hurricane Board-Up Clips, Fits 1/2 in. Thick Plywood, Stamped Steel, Unfinished, for Brick, Wood & Stucco, Pack of 50 (MP5099)

Feature

Description

These Hurricane Board-Up Clips are constructed of stamped steel and come unfinished. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

3. Prime-Line S 5100 Hurricane Board-Up Clips, Fits 1/2 in. Thick Plywood, Zinc-Plated Steel, For Brick, Wood & Stucco, Pack of 20,Black

Prime-Line S 5100 Hurricane Board-Up Clips, Fits 1/2 in. Thick Plywood, Zinc-Plated Steel, For Brick, Wood & Stucco, Pack of 20,Black

Feature

Description

These Hurricane Board-Up Clips are constructed of stamped steel and come in a zinc-plated finish. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

4. 20 HurricaneClip Premium Heavy Duty 1/2 Inch Stainless Hurricane Clips for use securing Plywood Hurricane shutters | Hurricane Panel Clips to Secure Hurricane Window Plywood | New Fit Design (20)

20 HurricaneClip Premium Heavy Duty 1/2 Inch Stainless Hurricane Clips for use securing Plywood Hurricane shutters | Hurricane Panel Clips to Secure Hurricane Window Plywood | New Fit Design (20)

Feature

Description

Item Package Quantity:20

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

5. HurricaneClip – StormClip – Premium Heavy Duty 1/2 Inch Carbon Steel Hurricane Clips for use securing Plywood Hurricane shutters | Hurricane Panel Clips to Secure Hurricane Window Plywood (20)

HurricaneClip - StormClip - Premium Heavy Duty 1/2 Inch Carbon Steel Hurricane Clips for use securing Plywood Hurricane shutters | Hurricane Panel Clips to Secure Hurricane Window Plywood (20)

Feature

Description

Item Package Quantity:20

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.

6. Plywood Clip 1/2in Galv Steel, 250 count

Plywood Clip 1/2in Galv Steel, 250 count

Feature

Description

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8″ gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge – Boxed.

7. HurricaneClip – StormClip – Premium Heavy Duty 1/2 Inch Stainless Steel Hurricane Clips for use securing Plywood Hurricane shutters | Hurricane Panel Clips to Secure Window Plywood New Fit Design(25)

HurricaneClip - StormClip - Premium Heavy Duty 1/2 Inch Stainless Steel Hurricane Clips for use securing Plywood Hurricane shutters | Hurricane Panel Clips to Secure Window Plywood New Fit Design(25)

Feature

Description

Item Package Quantity:25

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

8. Prime-Line Products PL 7893 Prime Line Pl7893 Window Screen Clip, 5/16 in D

Prime-Line Products PL 7893 Prime Line Pl7893 Window Screen Clip, 5/16 in D

Feature

Description

PRIME line window screen clip, 5/16 in depth, painted, white, includes: (12) no 10-24 Phillips pan head machine screws, used to secure window screens, storm windows and storm door panels. As north America’s largest supplier and manufacturer of window and door replacement hardware, Prime-Line meets the many needs of its clients with a vast selection of repair solutions.

9. 4 Pack of 0.75" Diameter Shelf Clips

4 Pack of 0.75" Diameter Shelf Clips

Feature

Description

Size:.75″ Wide

Split Sleeve Shelf Clips for posts. Sold per bag. Each bag contains 8 halves (enough for 1 individual wire shelf). Please note: Our individual wire shelves and full units include all necessary clips.

10. Levolor Valance Clips, Clear Plastic

Levolor Valance Clips, Clear Plastic

Feature

Description

Levolor Faux Wood Valance Clips

Conclusion

By our suggestions above, we hope that you can found Plylox Hurricane Window Clips 34 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general